Product Introduction
1. Description:
Integrated Ethernet SPD, used for protecting wiring network or similar transmission system, at the boundaries from LPZ0B-2 and higher.
2. Features:
High discharge capacity
Fully shielded design
Low insertion loss
Protection for all lines
Easy to replace
DIN rail installation
| Part Number | RS05J4R |
|---|---|
| Order No. | 962001 |
| Test according to | IEC/EN 61643-21/GB18802.1 |
| Number of ports | 2 |
| Technology | GDT & TVS |
| Nominal Voltage (Un) | 5V |
| Max. continuous operating d.c. voltage (Uc) | 5V |
| Max. continuous operating a.c. voltage (Uc) | 3.5V |
| Rated load current (45℃) (IL) | 100mA |
| C2 nominal discharge current (8/20 µs) per line (In) | 2kA |
| Voltage protection level for line-line In C2 (Up) | 13V |
| Voltage protection level for line-PE In C2 (Up) | 600V |
| Voltage protection level line-line at 1 kV/µs C3 (Up) | 40V |
| Voltage protection level line-PE at 1 kV/µs C3 (Up) | 600V |
| Frequency scope for line-line | 0–1000Mbps |
| Insertion loss | ≤0.5dB |
| Series impedance per line | 3 ohm |
| Protection pining | 1/2, 3/6, 4/5, 7/8 |
| Enclosure dimensions (H×W×D) | 94×33×27mm |
| Connection | RJ45 (socket/socket) |
| Location category | Indoor only |
| Operation temperature range (Tu) | -40℃ ~ +80℃ |
| Operation altitude | ≤4km |
| Degree of protection | IP20 |
| Relative humidity | ≤95% (max 40℃) |
| Method of mounting | 35mm DIN rail |
| Enclosure material | Metal shell |